Hey Jamie! Yes, the Malone SlopeSide Ski and Snowboard Carrier #MAL67QR comes with the hardware to mount in the T-slots as well as the clamps. You can see the T-slot adapters at the bottom of the attached picture next to the keys. Any big ski trips…
Good question Matt, you've definitely done your homework! Yes, your understanding is correct. The Replacement Fast Grip Clamp #TH94JV is the same mounting clamp used on the Thule Pulse Large cargo box #TH615. The FastGrip clamps are designed to…
Hey Brian, thanks for reaching out. I can definitely recommend some parts, but we will be cutting it very close on the clearance between your roof and the garage. The roof rack itself will clear fine, but the ski carrier is the part that will be…
Hello again, Randall, thanks for reaching out. I looked everywhere and I also was not able to find the exact T-slot size listed anywhere. I do know the bars use standard T-slots, so any accessory that is also made for standard T-tracks should work…
They will not Steve. The Elevate crossbars are 3.79" wide x 1-1/2" tall. The Replacement Fast Grip Clamp for Thule Pulse, Rooftop Cargo Boxes item #TH94JV works with crossbars that are no larger than 3-1/2" wide x 1-11/16" tall.…
Hey John, the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV that you referenced is compatible with round bars and aero shaped bars. The mounting hardware can clamp on to either bar shape and work really well. I attached a picture down below that shows…
I have the perfect solution for you. With a Rhino-Rack Pioneer Platform Rack like the Universal #RR42114BF, you can use the Rhino-Rack Carrier Brackets #RR43159 to mount the Ski and Fishing Rod Carrier #RR572. We actually have this setup as one part…
The Inno Wedge #INBRM864MBK is designed to fit on a variety of different crossbar styles including factory and most aftermarket bars. While I can't tell you specifically whether or not it's going to fit on your 2011 Toyota RAV4, I can tell…
The Inno Shadow 16 #INBRA1210BK is compatible with crossbar spreads ranging from 23-1/2" - 39". Since it looks like your 2016 Subaru XV Crosstrek has OEM rails that are spaced 27" apart on center this means the Shadow 16 will fit…
I have a solution for you, however part #INBRP9 is a replacement part and not intended to fit to a ladder rack. Instead, you'll need to get part #INBRP12, which will fully replace the mounting hardware on an Inno Shadow, Wedge or Stream cargo box…
Hey Andy, yes the Konig tire chains part #TH01221104 that you referenced are a fit for your tire size of 265/30/R20 but they are not your best choice since you have limited clearance. Instead what you would want is the K-Summit chains part…
I am not 100 percent clear what you are referring to in terms of cross section but I can tell you that each of the Thule Force XT cargo boxes will fit crossbars that are a maximum of 3-1/2" wide x 1-11/16" tall. They do have different…
Hey Jamie! Yes, the Malone SlopeSide Ski and Snowboard Carrier #MAL67QR comes with the hardware to mount in the T-slots as well as the clamps. You can see the T-slot adapters at the bottom of the attached picture next to the keys. Any big ski trips…
Good question Matt, you've definitely done your homework! Yes, your understanding is correct. The Replacement Fast Grip Clamp #TH94JV is the same mounting clamp used on the Thule Pulse Large cargo box #TH615. The FastGrip clamps are designed to…
Hey Brian, thanks for reaching out. I can definitely recommend some parts, but we will be cutting it very close on the clearance between your roof and the garage. The roof rack itself will clear fine, but the ski carrier is the part that will be…
Hello again, Randall, thanks for reaching out. I looked everywhere and I also was not able to find the exact T-slot size listed anywhere. I do know the bars use standard T-slots, so any accessory that is also made for standard T-tracks should work…
They will not Steve. The Elevate crossbars are 3.79" wide x 1-1/2" tall. The Replacement Fast Grip Clamp for Thule Pulse, Rooftop Cargo Boxes item #TH94JV works with crossbars that are no larger than 3-1/2" wide x 1-11/16" tall.…
Hey John, the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV that you referenced is compatible with round bars and aero shaped bars. The mounting hardware can clamp on to either bar shape and work really well. I attached a picture down below that shows…
I have the perfect solution for you. With a Rhino-Rack Pioneer Platform Rack like the Universal #RR42114BF, you can use the Rhino-Rack Carrier Brackets #RR43159 to mount the Ski and Fishing Rod Carrier #RR572. We actually have this setup as one part…
The Inno Wedge #INBRM864MBK is designed to fit on a variety of different crossbar styles including factory and most aftermarket bars. While I can't tell you specifically whether or not it's going to fit on your 2011 Toyota RAV4, I can tell…
The Inno Shadow 16 #INBRA1210BK is compatible with crossbar spreads ranging from 23-1/2" - 39". Since it looks like your 2016 Subaru XV Crosstrek has OEM rails that are spaced 27" apart on center this means the Shadow 16 will fit…
I have a solution for you, however part #INBRP9 is a replacement part and not intended to fit to a ladder rack. Instead, you'll need to get part #INBRP12, which will fully replace the mounting hardware on an Inno Shadow, Wedge or Stream cargo box…
Hey Andy, yes the Konig tire chains part #TH01221104 that you referenced are a fit for your tire size of 265/30/R20 but they are not your best choice since you have limited clearance. Instead what you would want is the K-Summit chains part…
I am not 100 percent clear what you are referring to in terms of cross section but I can tell you that each of the Thule Force XT cargo boxes will fit crossbars that are a maximum of 3-1/2" wide x 1-11/16" tall. They do have different…
Find the Perfect Ski and Snowboard Rack for Your Adventures
Ski and snowboard racks are essential for transporting your gear safely and efficiently. Whether you're heading to the mountains for a weekend getaway or a full season of skiing, these racks offer secure and easy-to-use solutions. Consider factors like capacity, ease of installation, and compatibility with your vehicle's crossbars when choosing the right rack.
Most ski and snowboard racks can hold between 2 to 6 pairs of skis or 1 to 4 snowboards. Some models are designed to accommodate a mix of both, making them versatile for families or groups with varied gear. It's important to check the specific capacity of the rack to ensure it meets your needs.
Yes, many racks are designed for easy installation and removal. They often come with clamps that fit snugly around various crossbar shapes, allowing for quick setup. Some models even come pre-assembled, reducing installation time to under 30 minutes. This makes them convenient for seasonal use or switching between vehicles.
Most ski and snowboard racks are compatible with a wide range of crossbar shapes and sizes. However, it's crucial to verify that the rack's clamps can securely fit your specific crossbars. Some users have noted snug fits on thicker bars, so checking compatibility before purchase is recommended.
These racks are built to withstand harsh weather, from freezing temperatures to road salt exposure. Many users report reliable performance over multiple seasons, with features like fold-down options to reduce noise. However, some racks may have sliding issues in cold, snowy conditions, so consider your typical climate when choosing.
While generally reliable, some racks may have lock mechanisms that stick or fail over time. It's also important to consider the height of the rack on your vehicle, as it can be challenging to reach if you're under six feet tall. Ensuring proper maintenance and checking for any design flaws can help mitigate these issues.
Ski and Snowboard Racks Parts or Accessories
Filters
